Amigo 4WD L4-2559cc 2.6L SOHC (4ZE1) (1993)
REMOVAL
Preparation:.
Battery negative cable.
1. Air pump drive pulley belt
2. Generator drive belt
3. Cooling fan
If is not necessary to pull out the cooling fan from the vehicle. Keep it in the radiator fan shroud.
4. Water pump pulley
5. AIC compressor drive belt
6
AIC compressor drive belt tensioner
7. Starter motor
8. Crankshaft pulley fixing bolt
-
Use special tool to remove the pulley fixing bolt.
Flywheel holder: J-38674
9. Crankshaft pulley
10. Timing belt cover
11. Timing belt. Refer to Timing Belt, See: Timing Components/Timing Belt/Service and Repair
12. Oil pump drive pulley
-
Use special tool to remove the oil pump pulley.
Puller: J-22888
13. Oil pump fixing bolts
14. Oil pump
INSPECTION AND REPAIR
Outer Rotor and Cylinder Body Clearance
1. Install the outer rotor to the cylinder body.