Amigo 4WD L4-2559cc 2.6L SOHC (4ZE1) (1993)
/Page-675001.png)
Clutch Slave Cylinder: Service and Repair
1. Raise and support vehicle.
2. Remove transmission.
3. Disconnect hydraulic line from slave cylinder. See: Manual Transmission/Transaxle/Service and RepairRefer to line 12 Removal and Installation.
4. Remove slave cylinder retaining bolts, then the slave cylinder from transmission case.
5. Reverse procedure to install.
6. Bleed clutch hydraulic system.
