Amigo 4WD V6-3.2L (1999)
Uneven wear: 0.05 mm (0.0020 inch)
3. Place the camshaft on V-blocks.
Slowly rotate the camshaft and measure the runout with a dial indicator.
Replace the camshaft if the runout exceeds the specified limit.
Run out
Limit: 0.1 mm (0.0039 inch)
4. Measure the camshaft journal oil clearance.
1. Measure the camshaft bracket housing inside diameter.
NOTE: Tighten camshaft bracket (2) to specified torque before measuring the camshaft bracket inside diameter.
Torque: 10 Nm (89 inch lbs.)
2. Subtract the camshaft outside diameter from the camshaft bracket housing inside diameter.
Oil Clearance
Standard: 0.027 mm - 0.078 mm (0.0011 inch - 0.0031 inch)