Amigo 4WD V6-32L (1999) Headlamp Bulb Service and Repair
Headlamp Bulb: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove the headlight bulb (2).
-
Disconnect the connector (3).
-
Release the socket retaining ring (1).
CAUTION: The halogen light bulb produces heat and temperature rises high, therefore, if the glass surface is contaminated it will be burnt by
heat leaving stains which will not come out. This may reduce the illuminating power or damage the bulb due to thermal deformation during
evaporation. In order to prevent this problem, do not touch the glass surface with your fingers.
Installation
To install, follow the removal steps in the reverse order.