Amigo 4WD V6-3.2L (1999)
11. Raise a brush spring to detach brushes (4 pcs) from the commutator face and pull off the brush holder (12) and brush (11).
12. Remove yoke assembly (14).
13. Remove armature (15).
14. Pull oft the yoke assembly, then remove armature, washer and center bracket. (A) (13).
NOTE: In disassembling the yoke assembly, hold the armature and pull off slowly the yoke assembly. Because of strong magnetic force, avoid
placing a metallic part near armature.
15. Remove dust cover (17).
16. Remove a dust cover and shift lever (16) from the gear case.
