Amigo 4WD V6-3.2L (1999)
Drive/Propeller Shaft: Service and Repair
Front Propeller Shaft
FRONT PROPELLER SHAFT AND ASSOCIATED PARTS
REMOVAL
1. Raise the vehicle on a hoist.
NOTE: Apply alignment marks on the flange at the front propeller shaft both front and rear side.
2. Remove bolt, nut and washer (Front axle side).
3. Remove bolt, nut and washer (Transfer side).
4. Remove front propeller shaft.
INSTALLATION
NOTE: Never install the shaft assembly backwards. Never insert bar between yoke lugs when tightening or removing bolts. Completely remove the