Ascender 2WD L6-4.2L (2003)
2. Install the water pump and secure the water pump with the bolts.
^
Tighten the bolts to 10 Nm (89 inch lbs.).
3. Install the water pump pulley.
4. Install the water pump pulley bolts.
5. Using the J 41240, secure the water pump pulley while tightening the water pump pulley bolts.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
6. Remove the J 41240.
7. Install the drive belt.
8. Install the fan and the shroud.
9. Fill the cooling system with the specified coolant and concentration.
10. Inspect for leaks.
