Ascender 2WD L6-4.2L (2003)
10. Clip transmission cooler lines to block.
11. Connect prop shaft to front differential.
12. Install the steering gear crossmember.
13. Install the left and right wheel drive shaft.
14. Install the oil pan drain plug.
^
Torque the oil pan drain plug to 26 Nm (19 ft. lbs.).
15. Install the engine protection shield and secure with the bolts.
^
Tighten the engine protection shield bolts to 25 Nm (18 ft. lbs.).
16. Install the left and the right front tires.
17. Lower the vehicle.
Important: Inspect the engine for oil leaks in order to ensure all sealing surfaces are sealed.
18. Service the engine with oil.
