Ascender 2WD L6-4.2L (2003)
Wheels: Technical Service Bulletins
Wheels/Tires - Wheel Weight Usage Precautions
Information IB06-08-S001
Proper Use Of OEM Service Wheel Weights, Marring And/Or
Damage Due To Use Of Non-OEM And/Or Incorrect Wheel Weight
Installation
ISSUE DATE: APRIL 2006
Affected Vehicles
2003-2007 Isuzu Ascender (US/UT)
2006 Isuzu i-280/i-350 (TI)
Service Information
NOTE:
It is critical to use the proper OEM wheel weights when service requires the tire/wheel assemblies to be balanced. Failure to use the proper OEM
wheel weights may result in damage, marring the wheel assembly and will NOT be covered under the vehicles warranty.
IMPORTANT:
Use the special polyester-coated weights listed on the tables below when balancing factory aluminum wheels with clip-on wheel balance weights,
which will reduce the potential for corrosion and damage to aluminum wheels.
IMPORTANT:
Use a nylon or plastic-tipped hammer when installing coated clip-on wheel balancing weights to minimize the possibility of damage to the polyester
coating.
Above is an illustration of the weight configuration approved for the Affected Vehicles. The weight should follow the contour of the rim flange and grip
firmly to the rim flange.
Parts Information
