Ascender 2WD L6-4.2L (2003)
6. Remove the CPA from the I/P module yellow 4-way connector (1) located behind the I/P support.
7. Disconnect the I/P module yellow 4-way connector (1) located behind the I/P support.
Enabling Procedure
1. Remove the key from the ignition.
2. Connect the I/P module yellow 4-way connector (1) located behind the main I/P support.
3. Install the CPA to the I/P module yellow 4-way connector (1) located behind the main I/P support.