Ascender 2WD L6-4.2L (2003)
Steering Wheel: Technical Service Bulletins
Steering - Revised Steering Wheel Replacement
TSB SB04-10-S001
Revised Steering Wheel Replacement Procedure (Service Manual Revision)
Issue Date: March, 2004
Affected Vehicles
2003 Isuzu Ascender (US).
Service Information
This bulletin is being issued to revise the Steering Wheel Replacement procedure in the Steering Wheel and Column sub-section of the Service Manual.
The steering wheel puller legs currently recommended in the Service Manual for use with steering wheel puller J 1859-A are incorrect and will not work
on these vehicles. The correct steering wheel puller legs that should be used with steering wheel puller J 1859-A are J 36541-A or J 42578. The Steering
Wheel Replacement procedure has been updated with the correct steering wheel puller tool usage.
NOTE:
Information released on paper and electronic format prior to bulletin release cannot be updated. For the most current and up to date information refer
to IsuzuONE.com.
This Service Bulletin is intended for use by professional, qualified technicians. Attempting repairs or service without the appropriate training, tools, and
equipment could cause injury to you or others and damage to your vehicle that may cause it not to operate properly.
Disclaimer
