Ascender 2WD V8-5.3L (2004)
Glove Compartment: Service and Repair
Door Replacement - IP Storage Compartment Door
Door Replacement - Instrument Panel (I/P) Compartment
Removal Procedure
1. Remove the right closeout/insulator panel.
2. Remove the 3 storage compartment retaining screws.
3. Remove the storage compartment from the IP.
Installation Procedure
1. Position the storage compartment to the IP.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the 3 screws.
Tighten: Tighten the screws to 2.5 Nm (22 lb in).
3. Install the right closeout/insulator panel.