Ascender 2WD V8-5.3L (2004)
Brake Caliper: Technical Service Bulletins
Brakes - Rear Caliper Mounting Bolt Torque Revision
TSB SB05-09-S003
Revised Rear Brake Caliper Bracket Mounting Bolt Fastener Specification (Service Manual Revision)
Affected Vehicles:
2003-2004 Isuzu Ascender
Service Information
This bulletin is being issued to revise the fastener tightening specification for the rear brake caliper bracket mounting bolt in the Disc Brakes sub-section
of the Service Manual.
NOTE:
Information released on paper and electronic format prior to bulletin release cannot be updated. For the most current and up to date information refer
to IsuzuONE.com.
The revised specification is as follows: Rear Brake Caliper Bracket Mounting Bolt = 200 Nm (147 lb-ft).
Disclaimer
