Ascender 2WD V8-5.3L (2004)
3. Install the auxiliary heater inlet and outlet hoses/pipes.
4. Connect the auxiliary heater inlet and outlet hoses/pipes to the heater water shutoff valve.
5. Install the auxiliary heater inlet and outlet hose/pipe nut.
^
Tighten the nut to 10 Nm (89 inch lbs.).
6. Install the hose to the throttle body.
7. Using J 38185, position the throttle body hose clamp at the throttle body.
8. Install the inlet and outlet hoses/pipes to the water pump.
9. Using J 38185, position the auxiliary heater inlet and outlet hose/pipe clamps at the water pump.
10. Install the outlet hose to the water pump.
11. Using J 38185, position the outlet hose clamp at the water pump.
