Ascender 2WD V8-5.3L (2004)
5. Adjust the caster and the camber angle by repositioning the lower control arm (2) until the specifications have been met. When the adjustments are
complete, hold the lower control arm in position so that the specifications do not change while tightening the lower control arm adjustment bolts.
^
Tighten the front lower control arm bracket mounting bolt to 260 Nm (192 ft. lbs.).
^
Tighten the rear lower control arm bracket mounting bolts to 240 Nm (177 ft. lbs.).
6. Verify that the caster and the camber are still within specifications.
When the caster and camber are within specifications, adjust the toe.