isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

IB07-02-S003 > < Fuel Pressure Release|Service Precautions
Page 1
background image

Fuel Injector: All Technical Service Bulletins
Fuel System - MIL ON/Multiple DTC's Set

Bulletin No.: IB07-11-S005

Issue Date: December 2007

Various Driveability Symptoms Due To Clogged Fuel Injectors, MIL DTC's P0171, P0172, P0174, P0300, P1174, P1175 
(This bulletin Supercedes IB07-02-S003) 

Affected Vehicles:
2003-2008 Isuzu Ascender
2007-2008 Isuzu i-290/i-370 (TI)
2006 Isuzu i-280/i-350 (TI)

Service Information

This bulletin is being revised to update model years.

Some customers may experience any of the following various drivability symptoms:

^

Extended Crank Time

^

Hard to Start

^

MIL Illuminated with DTCs

^

Hesitation

^

Lack of Power

^

Surge or Chuggle

^

Rough Idle

^

Light or Intermittent Misfire

Upon inspection a technician may find DTCs P0171, P0172, P0174, P0300, P1174 or P1175 stored in the Tech2. Due to various factors the fuel
injectors may have become restricted. Extensive testing has demonstrated that fuel related issues are the cause of clogged injectors. At this point no
specific fuel fuel constituent or engine condition has been identified as causing the restriction. The restriction causes the engine to operate at a lean air
fuel ratio.

This may either trigger the MIL to illuminate or the engine to develop various drivability symptoms. Refer to the Service Manual for fuel injector
cleaning procedures and further information.

Disclaimer

IB07-02-S003 > < Fuel Pressure Release|Service Precautions