isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Engine Controls - SES Lamp ON/DTC P0483 Set|Page 2710 > < Engine Controls - Engine Ticking Noise at Idle|Page 2705
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - SES Lamp ON/DTC P0483 Set

TSB SB05-01-S004

Service Engine Soon (SES) Light On, Diagnostic Trouble Code (DTC) P0483
 
Affected Vehicles:
2003-2004 Isuzu Ascender (US) with 5.3L V8 Engine (VIN P).

Service Information

Condition: 

Some customers may comment that the SES light is on. Diagnosis may indicate that DTC P0483 has set.

Possible Cause: 

The diagnostic calibration in the PCM may allow the DTC P0483 to set improperly.

Correction: 

Reprogram the Powertrain Control Module (PCM) with a new service calibration released with ITCS CD version 34 or newer.

Service Procedure

Refer to Service Programming System (SPS) in the Service Manual. As always, make sure your TECH2(R) is updated with the latest software version.

Warranty Claim Information

Use the labor operation table.

Engine Controls - SES Lamp ON/DTC P0483 Set|Page 2710 > < Engine Controls - Engine Ticking Noise at Idle|Page 2705