Ascender 2WD V8-5.3L (2004)
3. Install the valve body bolts which retain the internal wiring harness and install the TCC solenoid retaining bolts.
^
Tighten the control valve body retaining bolts to 11 Nm (97 inch lbs.).
^
Tighten the TCC solenoid retaining bolts to 11 Nm (97 inch lbs.).
4. Install the pressure control solenoid.
Ensure that the electrical tabs are facing outboard.
5. Install the pressure control solenoid retainer and retaining bolt.
Tighten the pressure control solenoid retaining bolt to 11 Nm (97 inch lbs.).
6. Install the TCC PWM solenoid to the control valve body.