Ascender 2WD V8-5.3L (2004)
Rear Door Window Glass Weatherstrip: Service and Repair
Sealing Strip Replacement - Rear Door Window Belt Outer
Sealing Strip Replacement - Rear Door Window Belt Outer
Removal Procedure
1. Remove the screw that retains the sealing strip to the door.
2. Lift upward on the forward edge of the sealing strip.
3. Remove the sealing strip from the pinch-weld flange.
Installation Procedure
1. Install the sealing strip to the pinch-weld flange, starting at the rear edge of the door.
2. Ensure that the sealing strip is fully seated to the pinch-weld flange.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the screw that retains the sealing strip to the door.
Tighten the screw to 1.2 N.m (10 lb in).
