Ascender 4WD V8-5.3L (2004)
4.
Install the remaining electrical connectors to the VCIM.
5.
Install the VCIM to the bracket.
6.
Ensure that the retaining tab (1) is fully seated.
7.
Install the protective cover (1) to the module.
8.
Position the right second row seat to a passenger position.
IMPORTANT:
After replacing the vehicle communication interface module, you must reconfigure the OnStar(R) system. Failure to reconfigure the system
will result in an additional customer visit for repair. In addition, pressing and holding the white dot button on the keypad will NOT reset this
version of the OnStar(R) system. This action will cause a DTC to set.
9.
Install the Tech 2. From the Main Menu select F0: Diagnostics and then select Model Year. On the Diagnostics screen select F1: Body and then
select Model and Engine Type. Scroll down and select Onstar. On the Onstar screen select F2: Special Functions. Use the Special Functions menu
and select F6: Setup New Onstar in order to perform the OnStar(R) setup procedure for this vehicle.
10.
Move the vehicle to an open area that is away from tall buildings and with a clear view of unobstructed sky.
Allow the vehicle to run for 10 minutes.
11.
Use the ID information menu on the scan tool to access the new Station ID (STID) and the electronic serial number (ESN) and from the new
VCIM.
12.
Press the blue OnStar(R) button to connect to the OnStar(R) Call Center. Tell the advisor that this vehicle has received a digital upgrade kit and
ask the advisor to perform the following procedure:
^
Add the new STID and the ESN to update the customer's account.
^
Activate the OnStar(R) Personal Calling feature, if available.
^
Perform a full reconfiguration on the vehicle.
13.
Follow any additional instructions from the OnStar(R) advisor.
14.
To complete setup vehicle owner MUST contact OnStar(R) within 60 days by pushing OnStar(R) blue button and then activating or reactivating
their subscription with OnStar(R). Customer will need VIN, the 10-digit STID number, and the 11-digit ESN number from the labels on the new
module to complete account activation.
Parts Information
To order the Autocraft Electronics upgrade kit contact Autocraft Electronics at 1-800-336-3998.
