isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Body - Doors are Hard to Close|Page 6841 > < Door Handle Bezel Replacement|Page 6832
Page 1
background image

Front Door Striker: All Technical Service Bulletins
Body - Doors are Hard to Close

2007 Service Bulletins

TSB SB07-11-S003

Issue Date: APRIL 2007

Doors Hard To Close (This Bulletin Supersedes SB05-11-S002)

Affected Vehicles

2003-2007 Isuzu Ascender

This bulletin is being revised to change the warranty information and add additional model years.

Condition:

Some customers may comment that one or more of the doors may be hard to close.

Possible Cause:

The door striker may be out of adjustment.

Correction:

Adjust striker.

Service Procedure

1.

Open the door.

2.

Remove the lock striker from the door opening.

3.

Close the door with the lock striker removed.

4.

Verify proper fit to the door opening and weatherstrips. Adjust the door frame as necessary.

5.

Install the lock striker to the door opening.

6.

Install the lock striker screws that retain the lock striker to the door opening.

Body - Doors are Hard to Close|Page 6841 > < Door Handle Bezel Replacement|Page 6832