Ascender 4WD V8-5.3L (2004)
Brake Caliper: Technical Service Bulletins
Brakes - Revised Rear Caliper Mounting Bolt Torque
TSB SB04-09-S002
Revised Rear Brake Caliper Bracket Mounting Bolt Fastener
Specification (Service Manual Revision)
ISSUE DATE: MAY 2004
Affected Vehicles
2003-2004 Isuzu Ascender (US/UT) models.
Service Information
This bulletin is being issued to revise the fastener tightening specification for the rear brake caliper bracket-mounting bolt in the Disc Brakes sub-section
of the Service Manual.
The following information has been updated within the Service Manual. If you are using a paper version of this Service Manual, please make reference
to this bulletin.
The revised specification is as follows:
^
Rear Brake Caliper Bracket Mounting Bolt -- 200 N.m (147 lb ft).
NOTE:
^
Information released on paper and electronic format prior to bulletin release cannot be updated.
Disclaimer
