Ascender 4WD V8-5.3L (2004)
14. With an assistant dry fit the window (1) to the opening in order to determine the correct position.
15. Using masking tape in order to mark the locations (1) of the window (2) in the opening.
16. Cut the masking in the center and remove the window from the opening.
IMPORTANT: Use care when applying glass prep clear #1 on the window. This primer dries almost instantly, and may stain the viewing area of
the window if not applied evenly.
17. Use a new dauber in order to apply glass prep clear #1 to the area approximately 10-16 mm (3/8-5/8 in) around the entire perimeter of the window
inner surface.
Immediately wipe the glass primed area using a clean, lint-free cloth.
