Axiom 2WD V6-3.5L (2002)
Front Bumper: Service and Repair
Front Bumper
Parts Location
Removal
1. Disconnect the battery ground cable.
2. Remove the front bumper fascia.
-
Remove the nine clips (2), the three bolts (1) and two screws (3).
3. Remove the front bumper center retainer.
-
Remove the two nuts and the bolt.
4. Remove the front bumper sides's retainers.
-
Remove the four nuts and the bolt from both sides.
5. Remove the front bumper reinforcement assembly.
-
Remove the four bolts.
6. Remove the front bumper center bracket.
-
Remove the two bolts.