Axiom 2WD V6-3.5L (2002)
7. Remove the inner waist seal.
8. Remove the tweeter.
9. Remove the courtesy light.
10. Remove the pull box bracket.
11. Remove the inside lock bracket.
-
Disconnect the cable.
12. Remove the speaker (2) and speaker spacer (1).
-
Disconnect the speaker connector (3).
13. Remove the waterproof sheet.
14. Remove the outer waist seal.
-
Remove the rear side screw and pull the outer waist seal upward.
15. Remove the window glass.
-
Operate the regulator (power window switch) to adjust the glass height and expose the access hole. Remove the 2 bolts fixing the bottom
channel and the regulator. Remove the glass.