Axiom 2WD V6-3.5L (2002)
Hood Latch: Service and Repair
Engine Hood Lock
Parts Location
Removal
1. Remove the hood lock control lever.
2. Remove the inner liner.
3. Remove the engine hood lock assembly.
-
Apply setting marks(1) to the hood lock assembly and the body prior to removal.
4. Remove the control cable.
-
Remove the cable fixing clips from the engine hood lock.
Installation
To install, follow the removal steps in the reverse order noting the following points:
1. Reroute the control cable to its original position, and check and see if the lock assembly and control lever work normally.
2. Tighten the hood lock assembly fixing bolts to the specified torque.
Torque: 10 N.m (87 lb in)
