Axiom 2WD V6-3.5L (2002)
13. Remove the lower quarter trim cover (1).
-
Remove the lower anchor bolt cover (4) and the lower anchor bolt (3) from the rear seat belt.
-
Pull the trim cover at the five clip positions (2).
-
Disconnect the accessory socket connectors (LH side).
14. Remove the upper quarter pillar trim cover (1).
-
Remove the cover and screw, pull the trim cover at the two clip positions (2).
-
Remove the shoulder anchor cap (4) and upper anchor bolt (3) from the rear seat belt.
15. Remove the upper rear pillar trim cover (5).
-
Pull the trim cover at the six clip positions (6) from the body panel.
16. Remove the assist grip (1) (Front & Rear).
-
Pull the assist grip downward.
-
Remove the caps and fixing bolts.