Axiom 2WD V6-3.5L (2002)
Expansion Valve: Service and Repair
Duct Sensor, Evaporator Core and/or Expansion Valve
Removal
1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant.
-
Refer to Refrigerant Recovery in this section.
3. Remove evaporator assembly.
-
Refer to Evaporator Assembly in this section.
4. Remove the duct sensor fixing clip.
Pull the sensor from the evaporator assembly.
5. Remove clip.
6. Remove attaching screw.
7. Remove upper case.
8. Remove lower case.
-
Slit the case parting face with a knife since the lining is separated when removing the evaporator.
