Axiom 2WD V6-3.5L (2002)
Instrument Panel Bulb: Service and Repair
Cruise Control Main Switch Illumination Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the meter cluster panel (4).
-
Refer to Instrument Panel Assembly in Body Structure section.
3. Remove the bulb (1).
-
Disconnect the TOD switch connector and cruise control main switch connector.
-
Remove the TOD switch (3).
-
Remove the cruise main switch (2).
Installation
To install, follow the removal steps in the reverse order.
Rear Wiper and Washer Switch Illumination Light Bulb
Rear Wiper and Washer Switch Illumination Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the lower cover assembly (3).
-
Remove the dash side trim cover.
3. Remove the bulb (1).
-
Disconnect the connector.
-
Remove the rear wiper and washer switch (2).
Installation
