Axiom 2WD V6-3.5L (2002)
10. Disconnect the wiring harness connectors located under the steering column then remove combination switch and SRS coil assembly.
Installation
1. Install combination switch and SRS coil assembly. After installation of combination switch assembly, connect the combination switch wiring
harness connector and the SRS 2-way connector located under the steering column. Then turn the SRS coil counter clockwise to full, return about
3 turns and align the neutral mark.
Caution: Turn the SRS coil counter clockwise until some resistance is felt, or damage may occur to the SRS coil.