Axiom 2WD V6-3.5L (2002)
Tighten
Tighten the throttle body mounting bolts to 10 N-m (87 lb in).
5. Install the coolant lines.
6. Connect all the vacuum lines.
7. Install the intake air duct.
8. Tighten the intake air duct clamp.
9. Connect all the electrical connectors:
-
Throttle position (TP) sensor.
-
Intake air temperature (IAT) sensor.Refer to Intake Air Temperature (IAT) Sensor.
10. Install the accelerator cable assembly.Refer to Engine Speed Control System section.
11. Fill the cooling system.Refer to Engine Cooling section.
12. Install the negative battery cable.
