Axiom 2WD V6-3.5L (2002)
Installation
1. Install the steering wheel and align the setting marks (3).
2. Tighten the steering wheel fixing nut (4) to the specified torque.
Torque: 34 N.m (25 lb ft)
3. Connect horn lead (1).
4. Connect air bag to wiring harness connector (2).
NOTE: Pass the lead wire through the tabs on the plastic cover (wire protector) of air bag to prevent lead wire from being pinched.
5. Install air bag into steering wheel and tighten bolts (7) to specified sequence as show in figure.
Torque: 8.8 N.m (78 lb in)
CAUTION: Never use the air bag assembly from another vehicle and difference model year air bag assembly.
The air bag assembly has identification colors on the bar code label as follows.
-
Light blue color for driver air bag assembly.
-
Light blue color for passenger air bag assembly.
Use only the air bag assembly for "UP".
6. Enable the SRS. Refer to Enabling the SRS in this section.
