Axiom 2WD V6-3.5L (2002)
Windshield Washer Switch: Service and Repair
Rear Wiper and Washer Switch
Removal
1. Disconnect the battery ground cable.
2. Remove the dash side trim panel (1).
3. Remove the lower cover assembly (2).
4. Remove the rear wiper & washer switch (4).
-
Disconnect the connector.
-
Push the lock from the back side of the lower cover assembly (3).
Installation
To install, follow the removal steps in the reverse order, noting the following point:
1. Push the switch with your fingers until it locks securely.
