Axiom 2WD V6-3.5L (2002)
Heated Glass Element: Description and Operation
Circuit Operation
Voltage is applied at all times through the EB-19 IGN. B2 fuse to the rear defogger relay coil. With the starter switch in ON, voltage is applied through
the C-16 RR WIPER fuse to the rear defogger relay contacts.
When you push the rear defogger switch to the ON position, battery voltage is applied from the C-8 (MIRROR DEFOG.) fuse to the left and right power
mirror defoggers. The power mirror defogger heats up to remove any fog from the mirrors.
When the rear window defogger switch is depressed, the PCM receives an input from the switch and, in turn, the PCM provides ground to the coils of the
rear window defogger relay. The contacts close, applying ignition voltage to the rear window defogger, rear window defogger indicator light (through the
C-9 and C-b REAR DEFOG. fuses), and the left and right power mirror defoggers (through the C-8 MIRROR DEFOG. fuse). The PCM acts as the timer
for the rear window defogger relay and keeps the contacts closed, maintaining the operation of the rear window defogger, left and right mirror defoggers
and indicator light for 10 minutes or until the ignition is turned to "ACC" or "OFF" or the rear window defogger switch is depressed again. The rear
window and mirrors heat to remove any fog from the glass and the indicator stays on to remind the driver that it is in use.
