Axiom 2WD V6-3.5L (2002)
6. Remove the inner waist seal.
7. Remove the tweeter and the courtesy light.
8. Remove the pull box bracket.
9. Remove the speaker and the speaker spacer.
-
Disconnect the speaker harness connector.
10. Remove the inside lock bracket.
-
Disconnect the cable.
11. Remove the waterproof sheet (1).
-
Taking notice of the door harness, peel the waterproof sheet off the door panel carefully.
12. Remove the outer waist seal.
-
Remove the front side screw and pull the waist seal upward.
13. Remove the window glass.
-
Operate the regulator (power window switch) to adjust the glass hight and expose the access hole. Remove the 2 bolts fixing the bottom
channel and the regulator. Remove the glass.