Axiom 4WD V6-3.5L (2004)
7. Remove the upper center pillar trim cover.
-
Remove screw cover (1) and screw.
-
Pry the trim cover with the clip from the body panel.
8. Remove the retractor fixing bolt and screw.
9. Remove the seat belt assembly.
-
Pull out the webbing guide.
10. Remove the adjustable shoulder anchor assembly.
-
Remove the two fixing bolts.
Installation
To install, follow the removal steps in the reverse order, noting the following points.
CAUTION: When replacing the front seat belt, always replace the seat belt with the same parts/part number.
1. Tighten the adjustable shoulder anchor assembly fixing bolts to the specified torque.
Torque: 39 N.m (29 lb ft)
2. Tighten the seat belt anchor bolts (Upper & Lower) and the retractor fixing bolts to the specified torque.
Torque: 39 N.m (29 lb ft)
