Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
Attaching Front Brake Hose
4. If you are removing the caliper for overhaul, disconnect the brake hose from the caliper.
4.1. Disconnect the brake hose fitting and two gaskets.
4.2. Discard the gaskets.
4.3. Plug the hole in the caliper housing, and in the brake hose fitting.
5. Remove the upper caliper mounting bolt. Discard the bolt.
6. If you are removing the caliper for overhaul, remove the lower mounting bolt. Discard the bolt.
7. Remove the caliper housing from the anchor bracket.
8. If you did not disconnect the brake hose, hang the caliper housing from the suspension.
INSTALLATION PROCEDURE
