Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
Brake Pad: Service and Repair
Removal and Installation
REMOVAL PROCEDURE
Use original equipment brake lining material for this vehicle. Original equipment brake parts provide the proper brake balance for stopping distance
and for braking control. The intended brake balance for this vehicle can change if original equipment brake lining materials are not used.
IMPORTANT: Do not disconnect the brake hose from the caliper.
1. Remove the caliper. Refer to Brake Caliper Replacement (Front Wheel).
NOTICE: Do not allow the brake components to hang from the flexible brake hoses. Damage to the brake hoses could result.
2. Suspend the caliper.
3. Remove the brake shoe and lining assemblies from the caliper.
4. Remove the retainer spring from the inboard brake shoe.
INSTALLATION PROCEDURE
1. Install the retainer spring on the inboard brake shoe.
2. Install the brake shoe and lining assemblies in the caliper.
NOTICE: Make sure the brake hose is not twisted or kinked after installation. Damage to the hose could result.