Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
8. Remove the drain plug from the side of the engine block, 2.2L shown.
9. Remove the drain plugs from each side of the engine block, 4.3L shown.
-
There may be more drainage from the radiator at this time.
-
Allow the engine block to drain until the flow stops.
NOTICE: Refer to Fastener Notice in Service Precautions. See: Service Precautions/Vehicle Damage Warnings
10. Apply a sealer to the threads and then tighten the engine block drain plug(s).
Tighten
Tighten the engine block drain plugs to 32 Nm (25 ft. lbs.).
IMPORTANT: Dispose of the used engine coolant properly. Store it in a used coolant holding tank awaiting proper disposal or recycling. Never
pour used coolant down the drain. Ethylene glycol antifreeze is a very toxic chemical. Disposal into the sewer system or into the ground water is
both environmentally irresponsible and illegal.