isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Heater Control Valve > < Fan Shroud|Upper|Page 1313
Page 2
background image

Tighten

Tighten the fan shroud attaching screws to 10 Nm (89 inch lbs.)

NOTICE:  Refer to Fastener Notice in Service Precautions. See: Service Precautions/Vehicle Damage Warnings

12. Fill the cooling system to the specified level and concentration. Refer to Draining and Filling Cooling System.
13. Start the engine and check for leakage. Refer to Cooling System Leak Testing.

Heater Control Valve > < Fan Shroud|Upper|Page 1313