Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
Daytime Running Lamp Diode Assembly: Service and Repair
Remove or Disconnect
1. Make sure the headlamp switch is in the OFF position and the ignition switch is in the LOCK position.
2. Open the hood
3. Protective cover from the underhood bussed electrical center.
4. Diode from the underhood bussed electrical center. Refer to Harness Routing Views in Electrical Diagnosis.
Install or Connect
1. Insert the diode.
2. Protective cover to the underhood bussed electrical center.
3. Close the hood.
