Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
Drive Belt: Service and Repair
REMOVAL PROCEDURE
NOTICE: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.
1. From under the vehicle, install a 3/8 inch drive wrench on the tensioner arm.
2. Rotate the arm counter clockwise.
3. Remove the drive belt.
4. Slowly release the tension.
INSTALLATION PROCEDURE
1. Route the belt over all the pulleys except the tensioner arm.
2. Observe belt routing for vehicles without air conditioning.
3. Observe belt routing for vehicles with air conditioning.