Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
CAUTION: Fusible links cut longer than 225 mm (approx. 9 inches.) will not provide sufficient overload protection.
To replace a damaged fusible link, cut it off beyond the splice. Replace with a repair link. When connecting the repair link, strip wire and use
staking-type pliers to crimp the splice securely in two places. For more details on splicing procedures, refer to "Splicing Copper Wire using Splice
Clips," "Splicing Copper Wire using Crimp and Seal Splice Sleeves," and "Splicing Twisted/Shielded Cable".
To replace a damaged fusible link which feeds two harness wires, cut them both off beyond the splice. Use two repair links, one spliced to each harness
wire.
Push to Seat and Pull to Seat Connector Repair
