Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
Coolant Line/Hose: Service and Repair
REMOVAL PROCEDURE
1. Remove the coolant from the radiator so that the level is below the hoses being removed. Refer to Draining and Filling Cooling System.
2. Loosen the radiator hose clamps.
3. Disconnect the radiator hoses from the radiator.
4. Disconnect the upper radiator inlet hose from the coolant outlet.
5. Disconnect the lower radiator outlet hose from coolant pump.
INSTALLATION PROCEDURE
IMPORTANT: The 2.2L engine uses a spring-type (constant tensioner) clamp at the radiator hose connections. Install hoses on dry, unpainted
surfaces in order to ensure proper sealing.
1. Place the radiator hose clamps loosely, on the ends of the hoses.
2. Connect the radiator hoses to the radiator.
