Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
Vehicle Speed Sensor: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the battery negative cable assembly from the battery negative terminal. Refer to Battery Disconnect Caution.
2. Raise the vehicle.
3. Support the vehicle with safety stands.
4. Disconnect the electrical connector from the vehicle speed sensor assembly.
5. Place a drain pan under the transmission in order to catch the oil.
6. Remove the following parts:
6.1.
The bolt
6.2.
The vehicle speed sensor
6.3.
The O-ring seal
INSTALLATION PROCEDURE
1. Coat a new O-ring seal with a thin film of transmission oil. Use Syndromes Transmission, Fluid or the equivalent.