Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
36. Connect the driver deployment harness wires to the power source in order to deploy the supplemental restraint steering wheel module.
37. Disconnect the driver deployment harness wires from the power source.
38. Separate the two ends of the passenger deployment harness wires.
39. Connect the passenger deployment harness wires to the power source in order to deploy the supplemental restraint IP module.
40. Disconnect the passenger deployment harness wires from the power source.
41. Twist together one end of each wire on the driver deployment harness in order to short the wires.
42. Twist together one end of each wire on the passenger deployment harness in order to short the wires.
