Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
Seat Belt Warning Timer: Service and Repair
Before servicing or replacing lap and shoulder belts, including single loop seat belt systems, refer to the following precautions:
- Clean the seat belt webbing with a mild soap and water solution only. using a soft brush or cloth.
- Do not bleach or dye the seat belt webbing.
- Keep sharp edges and other damaging objects away from the seat belts.
- Replace any seat belts which are cut or damaged in any way.
- Do not bend or damage any portion of the seat belt buckle or the latch plate.
- Use only the correct seat belt anchor bolts and tighten them to the correct torque value.
- Start the anchor bolts by hand to ensure that they are not cross-threaded.
- Seat belts and retractors must be serviced as a set with service replacement parts only. Do not attempt to make repairs to the individual components.
- Verify that the replacement part number is correct for the vehicle at that seating position. Do not substitute a seat belt from a different seating position.
- Replace any seat belts which have a visible CAUTION label instructing replacement.
Removal Procedure
The seat belt alarm is located in the truck body control module, which is located behind the instrument panel sound insulator(center).
1. Remove the center instrument panel sound insulator (center).
2. Remove the truck body control module.
Installation Procedure
1. Install the truck body control module.
2. Install the instrument panel sound insulator (center).
Torque: Seat Belt Anchor Bolts - 70 Nm
