Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
Tighten
-
Tighten the front bracket nut and the rear shackle nuts to 122 Nm (89 ft. lbs.).
10. Install the shock absorber.
Spring Bushing
REMOVAL PROCEDURE
1. Remove the spring assembly from the vehicle.
2. Remove the bushing from the spring assembly. Press the spring bushing from the spring in an arbor press.
3. Clean the spring eye of any remaining parts of the bushing.
4. Remove any burrs from the spring eye that could cause the new bushing to bind when the bushing is installed.
INSTALLATION PROCEDURE