Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
8. Install the wiring harness, the TCC solenoid and the O-ring seal.
9. Install the wiring harness bolts.
10. Install the TCC solenoid bolts.
11. Connect the electrical connectors to the valve body components.
Important: Certain bolts MUST be tightened in a spiral pattern as indicated by the arrows. If these bolts are tightened at random, the valve bores
may become distorted. This will inhibit valve operation.
NOTICE: Refer to Fastener Notice in Cautions and Notices.
12. Tighten the control valve body bolts in a spiral pattern starting from the center, as indicated by the arrows.
Tighten
Tighten the control valve body bolts (in sequence) to 11 N.m (97 lb in).