Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
INSTALLATION PROCEDURE
1. Position the master cylinder to the vehicle.
2. Install the clutch line into the concentric slave cylinder quick connect coupling.
3. Lower the vehicle.
4. Install the master cylinder to the cowl panel.
-
Hold the master cylinder at a 45°angle.
-
Rotate the master cylinder counterclockwise.
5. Install the cruse control servo to the cowl.
6. Connect the harness electrical connector to the cruise control servo electrical connector.
7. Secure the push rod to the clutch pedal.
8. Check the reservoir to ensure the oil level is at the full level. Use Delco Supreme (R) II Brake Fluid (GM P/N 1052535) or an equivalent.